Shipping Containers in Wombwell

Container Sales in Wombwell

Buying can suit ongoing storage, regular site use or a project where you expect to keep the container afterwards. Ownership can also give you more freedom to alter the unit later, although any modification should be considered alongside its intended use.

Common storage sizes include 10ft containers, 20ft shipping containers and 40ft shipping containers. A larger unit provides more capacity, but it also needs more room for delivery, placement, door operation and access to the contents.

Containers are constructed with Corten steel and are available in different conditions. A one-trip container has normally completed a single loaded journey from its manufacturer and generally shows less wear than an older used unit. Used containers can have dents, repairs, surface corrosion and marks from previous handling.

Wind and watertight describes a container intended to keep wind and rain from entering under normal storage conditions. Cargo-worthy is a different condition description associated with cargo transport. Age, repairs, inspection status and certification can vary between individual containers, so choose the condition according to the intended use rather than relying on the grade name alone.

Container Hire in Wombwell

Container hire can work well for building work, renovations, temporary site storage and other requirements with an expected end date. When the hire finishes, the unit can be collected rather than becoming something you need to store, relocate or sell.

Consider the likely duration before choosing between hire and purchase. Hire may suit a temporary requirement, while buying can make more sense if the container is likely to remain useful after the original project has finished.

Any proposed modifications to a hired container should be discussed before work is carried out. Cutting openings, fitting permanent equipment or making other alterations may be restricted. Responsibility for damage and the condition expected when the unit is collected should also be clear from the hire terms.

Keep future collection access in mind when selecting the position. Fencing, building work, stored materials or parked machinery can make collection difficult even if the container was straightforward to deliver at the start.

Special Container Types

A standard dry container suits many general storage requirements, but some loads need a different design. Refrigerated, open top and flat rack containers serve more specific purposes and should be selected according to the goods and the way they need to be handled.

Refrigerated containers, commonly called reefers, are intended for temperature-controlled applications. Open top containers allow loading from above where cargo cannot conveniently pass through standard end doors. Flat racks are designed for loads that may be oversized or unsuitable for a fully enclosed container.

Where a standard dry unit does not suit the job, you can compare 20ft refrigerated containers, 20ft open top containers and 20ft flat rack containers. The load and handling method should determine the container type.

Check Container Dimensions Before Ordering

The nominal container length is only part of the space calculation. Allow for the full external dimensions, cargo-door opening and practical access around the unit. Delivery can require substantially more room than the final footprint of the container.

A standard 20ft container is approximately 20ft long, 8ft wide and 8ft 6in high. Where space is restricted, check the full 20ft standard container dimensions before preparing the site.

For larger storage requirements, check the 40ft standard container dimensions. A 40ft unit provides greater capacity but also needs a longer clear position and suitable access for the delivery vehicle.

Container Delivery and HIAB Placement in Wombwell

A HIAB is a lorry-mounted crane used to lift a shipping container from the delivery vehicle and position it on site. Successful placement depends on vehicle access, available working space, ground conditions and crane reach. A position that is large enough for the container itself is not necessarily suitable for the delivery operation.

Before arranging delivery, check the complete access route and tell the supplier about:

• Gate and entrance width
• Road and access-track width
• Tight bends and available turning space
• Grass, soft ground and significant slopes
• Walls, fences and buildings close to the proposed position
• Overhead cables, branches and other obstructions
• Distance between the delivery vehicle and final position
• Required cargo-door orientation

Grass and soft ground need particular attention because the delivery vehicle and its stabilisers require suitable support as well as the container itself. Tell the supplier about questionable ground conditions before delivery is arranged.

Crane reach should also be checked where the container needs to be placed away from the side of the vehicle or beyond an obstruction. Accurate site information helps establish whether the proposed position is practical before delivery.

Preparing the Ground for a Container

A container should have firm, reasonably level support. If the supporting points settle unevenly, the frame can twist and the cargo doors may become difficult to open and close.

Drainage should be considered at the same time. Water collecting beneath or around the unit can contribute to poor ground conditions and make future access more difficult. Our guide to container foundations covers the main siting considerations.

Decide which way the cargo doors need to face before delivery. Think about loading, pedestrian access, vehicle movements and anything that could obstruct the doors later. Changing the orientation after placement may require the container to be lifted again.

Preparing a Container for Storage

A wind and watertight container is intended to keep external weather out, but condensation can still form inside. Moist air can condense against colder steel surfaces as temperatures change, while wet goods or packaging can introduce additional moisture.

Ventilation can help with some storage applications. Contents that are particularly sensitive to moisture or temperature may need further measures such as lining or insulation. The right approach depends on the goods, the site and the expected storage period.

A lockbox helps shield the padlock area, but security also depends on the lock used and how the site is managed. Packing matters too. Keep frequently needed items accessible rather than filling the container so tightly that everything has to be moved to reach the rear.

Planning Permission for Containers in Wombwell

Planning requirements can depend on the intended use, how long the container will remain, the status and location of the site, neighbouring property, listed status, conservation areas, associated works and whether the proposal involves a change of use.

Temporary use does not automatically determine the planning position. Before committing to placement or significant modifications, check the circumstances of the site. Our page on shipping container planning permission in Wombwell provides further information. Where there is uncertainty, check current requirements with the relevant local council.

Using a Container for Export

A container suitable for static storage should not automatically be assumed suitable for international shipping. Export use can require an appropriate CSC status, inspection and acceptance by the shipping line. CSC refers to the International Convention for Safe Containers and the safety approval information associated with containers used in international transport.

An export movement can also involve Verified Gross Mass, usually shortened to VGM, shipping documents, customs requirements, insurance and Incoterms 2020. Delays or changes to transport arrangements can result in storage, detention or demurrage charges depending on the circumstances.

Our guide to Shippers Own Containers covers relevant points where you are considering using your own unit for shipping. For a specific export movement, confirm requirements with the shipping line, freight forwarder, customs agent, insurer or other relevant adviser before buying or loading the container.

Choosing a Shipping Container in Wombwell

Start with the intended use and expected duration, then choose the size, type and condition. Measure the full delivery route as well as the final position, including access widths, ground conditions, overhead obstructions and space for the delivery vehicle and crane.

For storage, consider ventilation, security, drainage and access to the contents. For hire, make sure the container can still be reached for collection. If you intend to modify or export a purchased container, establish those requirements before selecting the unit.

To discuss container size, condition, hire or purchase requirements and access to your Wombwell site, contact Shipping Containers of Leeds for a quote or call 0330 0130 636.